Topics Map > Services > Research Computing and Support > CCAST

Highlights - Computational Fluid Modeling of Floods

Principal Investigator: Trung Bao Le (Civil and Environmental Engineering, North Dakota State University)

Dr. Le’s research involves computational method and code development to solve fluid flow problems in environmental applications. The goal is to develop highly scalable and efficient flow solvers for the next generation of exascale computing systems to study fluid flows over complex geometries and moving boundaries under turbulent condition. 

The Computational Fluids Laboratory led by Dr. Le currently focuses on river flows, specifically Spring floods which usually cause serious damage to communities and infrastructure in the Midwest. This problem requires resolving 3D flow structures with large disparities of temporal and spatial scales over irregular domains. 

His research group has contributed to multiple NSF, DOE, and NIH-funded projects on developing high-performance computing (HPC) codes, including Virtual Flow Simulator (VFS) which is capable of simulating multi-physics/multi-phase flows with advanced turbulence models over complex terrains. These codes have been tested and ran on HPC clusters at CCAST and national computing facilities such as the Argonne Leadership Computing Facility and the Pittsburgh Supercomputing Center.
Understanding Spring floods in North Dakota

Major cities of North Dakota have suffered great losses in the last few decades from Red River floods. Understanding the hydrological mechanism of Spring floods, especially under these extreme events could potentially contribute to the new development of flood monitoring and mitigation strategies. Dr. Le’s Lab is developing methods that use remote-sensing data and HPC techniques to simulate flow dynamics in rivers under open-surface and ice-covered conditions; see Fig. 1. Fargo, North Dakota, is a pilot site for collecting field measurement data which is then used to validate and verify the computational model before applying it to other rivers.

Trung Le, Fig. 1

Figure 1: Flows in the Red River of the North in Fargo, North Dakota, under two regimes in winter 2019: (a) open-surface and (b) ice-covered conditions.

Trung Le, Fig. 2

Figure 2: Preliminary data of the Red River hydraulics: (a) assembled LiDAR data, (b) 3D model of the city of Fargo reconstructed from the Digital Terrain Model (DTM), (c) deployment of ADCP across one cross-section, (d) utilization of accessible bridges in downtown Fargo, and (e) high-velocity region was found on the outer bank of the Red River due to river meandering.

An example of the work carried out by Dr. Le’s Lab is shown in Fig. 2. The topographic data of the downtown Fargo area was surveyed by the North Dakota Water Commission. From the original data, the Light Detection and Ranging (LiDAR) data were assembled using ArcGIS and further processed to show details of the floodplain including highways, streets, and large building  blocks; see Fig. 2(a). Other, smaller details of man-made structures such as floodwalls, ditches, and small channels, were also visible as seen in Fig. 2(b). Since the LiDAR data was constrained within the dry-land area, the bathymetry of the riverbed was not available. His group carried out expeditions to measure the bathymetry and flow distribution of the Red River reach in downtown Fargo; see Figs. 2(c) and 2(d). An Acoustic Doppler Current Profiler (ADCP) was used to measure stream data in Lindenwood Park; the flow velocities are shown in Fig. 2(e). Their results showed a complex flow distribution among cross-sections resulting from the meandering characteristics of the Red River. 

Trung Le, Fig. 3

Figure 3: Flow velocity distribution on the surface in one of the bends.

Flow dynamics during spring is not well understood, especially with the presence of ice. In their study, three-dimensional flow structures are analyzed in a river bend during winter to understand the linkage between ice coverage and velocity profile distribution. A river reach of the Red River is selected as the study site. Large-eddy simulations (LES) are carried out on CCAST’s supercomputer and results are shown in Fig. 3. This is a massive amount of data containing a total of 100 million grid points resolving very detailed flow at every 4 meters. They compare the simulation result and field measurement data to examine how good the simulation is. The river bend affects how flow velocity is distributed due to the impact of bank curvature. Since the field measurement can only provide flow conditions at  a limited number of locations, the high-fidelity simulation has the advantage of covering the entire river reach in downtown Fargo. Such details of flow distribution are important for planning of flood fight as well as for developing new mitigation measures in the case of historical flooding. This type of simulation is highly valuable for the city of Fargo in urban planning as well as risk management.

[1] T. B. Le, A. Khosronejad, F. Sotiropoulos, N. Bartelt, S. Woldeamlak, and P. Dewall, “Large-eddy simulation of the Mississippi River under base-flow condition: hydrodynamics of a natural diffluence-confluence region,” Journal of Hydraulic Research 57, 836 (2019).
[2] A. Khosronejad, T. Le, P. DeWall, N. Bartelt, S. Woldeamlak, X. Yang, and F. Sotiropoulos, “High-fidelity numerical modeling of the Upper Mississippi River under extreme flood condition,” Advances in Water Resources 98, 97 (2016).

See Also:

Keywords:ccast hpc research highlights   Doc ID:109479
Owner:Khang H.Group:IT Knowledge Base
Created:2021-03-02 13:19 CDTUpdated:2021-03-06 15:33 CDT
Sites:IT Knowledge Base
Feedback:  0   0